Skip to main content

Device Trust release notes

Important

For operating system compatibility with Device Trust, make sure to review the Arculix Device Trust compatibility table.

Release notes for Arculix Device Trust (formerly Acceptto Device Trust).

3.0 Build 1430-0008 - December 2, 2022

Fixes
  • Fixed an issue where user parsing fails when computer name is the same as the username

3.0 Build 1416-2120 - November 23, 2022

Fixes
  • Fixed an issue where users are randomly unpaired on macOS

3.0 Build 1361-0913 - September 29, 2022

Enhancements
  • Support for eGuardian certificates issued by enterprise CA’s

  • Windows - Capture the device serial number to send with the heartbeat

Fixes
  • Handle new error message to show “Time is out of sync for this device” instead of ”No response from server…”

  • macOS - Support login with users that have no identity

3.0 Build 1346-1039 - September 08, 2022

Enhancements
  • macOS - Capture the device serial number to send with the heartbeat

Fixes
  • Fixed an issue related to authentication via SMS causing a “TOTP Failure” message in Recent Transactions

3.0 Build 1329-1112 - August 24, 2022

Enhancements
  • Device Trust has been rebranded to Arculix

  • Authentication is no longer required after pairing

Fixes
  • macOS - Fixed an issue where macOS gets blocked booting with Arculix installed

  • Fixed an issue with pairing via TOTP

2.3 Build 1282-0850 - July 12, 2022

Enhancements
  • macOS - Added new settings used to disable login under macOS safe mode

2.3 Build 1240-0935 - June 3, 2022

Enhancements
  • macOS - Provide help on the pair dialog

  • macOS - Add Security key PIN support

Fixes
  • macOS - Smart card readers displaying wrong messages and not signing in

  • User unpairs when connected through WiFi portal

2.3 Build 1207-0955 - April 26, 2022

Fixes
  • macOS - Upgrade from Big Sur to Monterey disables the authorization plugin

  • Windows - ATAgent doesn’t shutdown on upgrade

2.3 Build 1191-1253 - April 8, 2022

Enhancements
  • Windows - Security key improvements

  • Windows - Support PIN for Security Key

  • macOS - Provide the ability to skip pairing

2.3 Build 1162-1227 - March 17, 2022

Enhancements
  • Windows - Step up authentication with password based on last login time

2.3 Build 1154-1613 - March 4, 2022

Fixes
  • macOS - Require MFA on reboot if user required MFA before reboot

2.3 Build 1149-2049 - March 4, 2022

Fixes
  • macOS - Touch ID not detected on M1

  • macOS - Lock after FileVault boot not working

  • Windows - Add Offline Authenticator UI issue

2.3 Build 1135-1022 - February 25, 2022

Enhancements
  • Windows - Provide the ability to skip pairing.

  • Windows - Provide help on the pair dialog.

  • macOS - Add the ability to disable requiring MFA after loss of internet

Fixes
  • macOS - Unpair doesn’t always lock the user.

2.3 Build 1116-1559 - February 9, 2022

Enhancements
  • Added SSL certificates for new environments to improve security.

  • Hide 'More Options' field when all of the UI elements it hides are disabled.

  • macOS - Can now be installed on Monterey 12.2

2.3 Build 1101-1126 - January 24, 2022

Enhancements
  • Settings are now applied when AutoPushEnabled is disabled

  • Added setting AllowAddOfflineAuthenticator - Enable/Disable the use of external TOTP authenticators

  • Settings are now stored in the secure store which means even admins with the ability to take ownership cannot change settings locally.

  • Settings can no longer be configured via the command-line

  • Runtime configuration. In order to change MFAUrl, FayeUrl or HttpProxyAddress an administrator will need to use the new ATAgent command ‘ATAgent rtc install company.rtc’.

  • macOS - Enabled support for Monterey 12.1 installs

  • Windows - Add the ability to sign in via a QR code scan.

  • Windows - Add the ability to use BLE Authentication to sign in.

Fixes
  • Fixed an issue with Device Trust still waiting for a push notification when It’sMe is unpaired.

2.3 Build 1046-1245 - November 23, 2021

Enhancements
  • Windows - Added the ability to login using a Certificate instead of a password

  • Windows - Added HTTP proxy support for eGuardian communications (HTTP and Faye)

  • Added support for Kensington VeriMark Guard. Device Trust now supports the following security keys: YubiKey 5 series (C/NFC), Feitian BioPass, YubiKey Bio, Kensington VeriMark Guard

2.2 Build 994-0735 - September 29, 2021

Enhancements
  • macOS Login Configurations added: Basic, Hybrid and Advanced. Depending on the value of settings MFAFileVaultEnabled and MFALockEnabled, these 3 modes require MFA at either the Login screen, on Boot and/or the Lock Screen.

  • Unpairing a workstation now sends the user to the login screen if they are currently logged in/unlocked.

  • File Logging can now be enabled/disabled by eGuardian.

  • Logging now reports setting changes made by eGuardian.

2.2 Build 958-0919 - August 24, 2021

Enhancements
  • macOS - Always MFA after FileVault boot. When a macOS workstation has FileVault enabled and boots up, MFA will always be required.

Fixes
  • Limit rapid security key attempts to prevent potential UI issues.

  • Holding the enter key for the password or holding number keys for TOTP causes numerous entries in the audit trail.

  • Security key timeout issue. Verification will now be restarted as soon as the security key times out until either the user logs in or closes the MFA dialog.

  • Windows - If Security key is plugged in while the MFA dialog is up, then login or unlock is required to use it again. Security key presence will now be detected after MFA dialog is canceled.

2.2 Build 939-1628 - August 4, 2021

Enhancements
  • ATAgent user list command to display users on the system

  • Enhanced Event reconnection

  • macOS - Don’t lock immediately after losing internet connection

  • macOS - Agent doesn't supply gateway mac address

Fixes
  • Fixed: Windows - ATAgent Stop not synchronous

  • Fixed: Windows - Biometric crash via RDP

2.2 Build 911-1546 - July 12, 2021

Enhancements
  • macOS - Now detects macOS 12 Monterey and verified working

  • macOS - Use Apple Lock Screen by default if Touch ID is present

  • Windows - Changed system login timeout to 3 minutes.

  • Windows - Now detects Windows 11 and verified working.

2.2 Build 874-1459 - May 8, 2021

Enhancements
  • macOS - Send the user to login window if loss of internet, only if MFALoginEnabled is true

  • macOS - Notarized build

  • Regression: Timer incorrect after channel reuse change

  • Add Push button instead of “send another push” link

  • Push icon

  • Windows - Improved DPI scaling

Fixes
  • Windows - Security Key slowing down pairing process

  • Windows - Kanji error message on an English system

  • Windows - UI username cutoff

  • Timer reset is delayed when requesting SMS or Email after auto push

  • Security key changes cause a random crash while pairing